THREE PART SPECIFICATION

{edit to suit project requirements}

PART 1 –GENERAL

1.01 Summary

This section includes toilet compartments and screens as follows:

1. Type and series:

2. Style and configuration:

3. Urinal and privacy screen:

1.02 Submittals

Product Data:

Submit manufacturer’s current technical data for materials, fabrication,

finishing, fastenings, hardware and installation details.

Shop Drawings:

Submit shop drawings of field measurements for fabrication, installation

and assembly of project. Show complete layout and elevations of partitions.

Indicate door swings, method of mounting, bolt hole locations,

details of adequate steel reinforcement or wood blocking in walls.

Samples:

Submit samples of manufacturer’s standard colors and hardware for

selection and approval by architect.

1.03 Field Measurements and Project Conditions:

Verify final dimensions of field measurements as indicated on shop

drawings before fabrication and installation.

1.04 Delivery, Storage and Handling:

Deliver and store material in original crates with protective plastic

covering. Protect from all possible damage while stored at site.

PART 2-PRODUCTS

2.01 Acceptable Manufacturers:

Laminating Technologies, a division of YTI Enterprises, Inc.

2.02 Materials: (see detailed individual product specification)

- PLASTIC LAMINATE

- SOLID PHENOLIC

- POLYMER

PART 3-EXECUTION

3.01 Installation:

a. Install partitions secure, rigid, straight, level and plumb.

b. Install pilasters in position with manufacturer’s recommended mounting

devices.

c. Allow for spacing between wall and pilasters (1”), and between panels

and walls (1/2”).

d. Equip each door with hinge, slide latch, strike, keeper, coat hook and

door bumper. Outswing door are to be provided with door pull.

e. For floor mounted overhead braced pilasters secure heavy-duty, antigrip

aluminum headrail.

3.02 Adjustment:

a. Adjust and align door hinges for correct positioning and operation of

door.

b. Adjust all partition components for consistent horizontal level lines.

c. All surfaces shall be cleaned after installation is complete.

d. Job site shall be left clean and proper after installation is complete.

3.03 Warranty:

Provide manufacturers standard warranty against material, workmanship

and de-lamination.

SOLID PHENOLIC – Specification

GENERAL MATERIAL INFORMATION

Produced by thermally fusing at high pressure and temperatures

decorative papers saturated in melamine resin with impregnated kraft

layers. Solid black core edge throughout.

STYLES AND CONFIGURATIONS

1. Floor Mounted

2. Floor Mounted Overhead Braced

3. Ceiling Hung-adequate backing required

4. Floor to Ceiling Mounted

DOORS AND PANELS

Doors shall be 3/4” thick phenolic core.

Panels shall be 1/2” thick phenolic core.

PILASTERS

Pilasters shall be 3/4” thick phenolic core.

1. Floor Mounted pilasters shall be mounted to the floor with 1/2” x 4”

expansion lock bolt sleeve anchors that are fastened to the bottom of the

pilaster by means of a 3/8” thick x 1” wide steel base bar that is secured

with 3/8” all thread rods inserted 3” deep into a 1” diameter PVC plug

embedded within the face of the pilaster.

2. Floor Mounted Overhead Braced shall be mounted to floor as Floor

Mounted pilasters.

3. Ceiling Hung pilasters shall be mounted to the ceiling with 3/8” all

thread rods that are fastened to the top of the pilaster by means

of a 3/8” thick x 1” wide steel base bar that is secured with 3/8” all

thread rods inserted 3” deep into a 1” diameter PVC plug embedded

within the face of the pilaster.

4. Floor to Ceiling pilasters shall be mounted to the floor as Floor Mounted

pilasters and shall be mounted to the ceiling with adjustable inter-locking

cast metal “L” brackets that are fastened to the top of the pilaster by

means of opposite and complementary adjustable inter-locking cast

metal “L” brackets.

HARDWARE AND FITTINGS

1. Door hardware shall be either:

*Std [A] Surface mounted, fully adjustable, gravity type and self-closing

action hinge. Two hinges are supplied per door. Door shall be equipped

with hinge surface mounted onto door and pilaster with stainless steel,

one-way, theft-resistant fasteners that are through bolted. Hinge is a type

304 satin stainless steel.

*Optional [B] Full Height, spring loaded, gravity type and self-closing

action piano hinge at 57 1/2” overall length. Door shall be equipped with

hinge surface mounted onto door and pilaster with stainless steel, oneway,

theft-resistant fasteners that are through bolted. Hinge is a type 304

satin stainless steel.

2. Slide latch, strike and keeper shall be of type 304 satin stainless steel.

Coat hook, door bumper and door pulls type 304 satin stainless steel are

supplied and installed surface mounted with stainless steel, one-way,

theft-resistant sheet metal screws.

3. All brackets for panel to wall and panel to pilaster connections shall be

either :

*Std [A] 2 1/2” long, double sided, heavy-duty satin stainless steel stirrup

brackets. Brackets shall have rounded corners.

*Optional [B] Matrix Set: full length 57 1/2” heavy-duty, type 304 satin

stainless steel one sided “L” brackets which shall be pre-drilled. One

bracket shall be provided for each connection.

*Optional [C] Spectrum Set: full length 57 1/2” heavy-duty, type 304 satin

stainless steel double sided “F”, ”T” and ”U” brackets which shall be

pre-drilled. One bracket shall be provided for each connection.

4. All wall connections shall be installed with #14 x 1 3/4” stainless steel

sheet metal screw. All panel and pilaster connections shall be installed

with stainless steel, one-way, theft-resistant fasteners.

5. Pilaster shall have a 4” high sleeve of type 304 satin stainless steel which

conceals all floor and ceiling mounted hardware.

6. For Floor Mounted Overhead Braced, pilasters at the top are secured by

a heavy-duty, anti-grip aluminum headrail.

FINISH

Decorative laminate finish bonded both sides to phenolic core. Edges shall

be polished and machined smoothed throughout.

COLORS

Colors shall be selected from current standard line offered.